Dimensions
CHARMs and Controller Cabinets:
800mm (W) x 2000mm (H) (+100mm plinth) x 600mm (D)
800mm (W) x 2000mm (H) (+100mm plinth) x 800mm (D)
Network / Server Cabinets:
800mm (W) x 2000mm (H) (+100mm plinth) x 800mm (D)
800mm (W) x 2000mm (H) (+100mm plinth) x 1000mm (D)
800mm (W) x 2000mm (H) (+100mm plinth) x 1200mm (D)
Access
Front Access – Single Door, Right Hand Hinged, Push Button and Lock Insert
Front and Rear Access – Single Door on Front and Rear, Right Hand Hinged, Push Button and Lock Insert
Protection Category
IP54, NEMA/ TYPE 12
IP20, NEMA/ TYPE 1 with vented doors
Weight
Front only Cabinet ~ 200kg
Front Rear Cabinet ~ 300kg
Network / Server Cabinet ~150kg (Empty Cabinet)
(May vary as per hardware added by option selection)
Material
Cabinet Frame : Sheet Steel, 1.5 mm, Dipcoat-primed,
Door: Sheet Steel, 2 mm, Dipcoat-primed, Powder-coated on the Outside, Textured Paint,
System Cabinet Colour: RAL 7035, Plinth RAL 9005
Network/Server Cabinets Colour: RAL 7035 / RAL 9005, Plinth RAL 9005
Door fans
Continuous run or with thermostat control
Power Requirements
Redundant distribution through Main Disconnect Switch:
100-120 VAC 50/60 Hz
220-240 VAC 50/60 Hz
Configured with one of the following internal power supply systems:
2 x 20A and full redundant (primary and secondary) 24 VDC distribution
2 x 40A and full redundant (primary and secondary) 24 VDC distribution
Control Network
Redundant Copper (RJ45)
IO Count / Type
DeltaV SIS LS CHARMs Cabinets:
Up to 480 LS IO AC powered CSLS
SIS - CSLS with LS Non-IS, IS IO CHARMs
Controller Cabinets:
SIS - SZ Controller, LSNB
Network / Server Cabinets:
Network Cabinets
Network / Server Cabinets
Name Plate
Name Plate Holder with Nameplate Insert
Environmental Specification
Indoor installation
Equipment Room – HVAC Controlled, Recommended temperature +25° C (+77° F)
IT Room – Recommended temperature +20° C (+68° F)
Relative humidity
5-95% (non-condensing)
Globally Certified
Europe: CE
North America: Ordinary Location (CSA Marking) - Optional
